0
Διαβάζοντας πρόσφατα αυτό το άρθρο http://electronics.stackexchange.com...ircuit-for-pwm είδα αυτή την απάντηση
4.It's a good idea to put a capacitor (0.1uF is enough) between the 12V rail and the gates of Q1 and Q3. When the 12V first comes up, the gate capacitance of Q1 and Q3 will hold the voltage on the gates low until enough current has flowed through the resistors and into the gate. That may cause Q1 and Q3 to turn on momentarily. The capacitor will force the gate voltage to follow the 12V rail as it comes online and prevent that from happening.
Μετάφραση : Κατά την έναρξη της τροφοδοσίας της γέφυρας οι gates των Q1 & Q3 θα είναι low μέχρι να φορτίσουν, σε σχέση με των drains. Αυτό θα τα ενεργοποιήσει στιγμιαία. Με την προσθήκη του πυκνωτή η πύλη θα αναγκαστεί να ακολουθήσει την τροφοδοσία.
Παίζει?